B10.5 N03-140

ISO/IEC JTC1/SC17/WG8
Contactless integrated circuit(s) cards
ISO/IEC JTC1/SC17/WG8 SD1

Standing Document 1: WG8 Projects

(Status as of 2003-07-29)

The projects of WG8 are concentrated on the development and maintenance of the following standards:

For details on WG8 projects and other WG8 related details from the SC17 Secretariat click here


Project Details on:

ISO/IEC 10536, Close-coupled cards

The Standard series ISO/IEC 10536 consists of 3 parts, which are:

ISO/IEC 10536-1 Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards -
Part 1: Physical characteristics


International Standard, published on 15th April 2000

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 10536-2 Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards -
Part 2: Dimensions and location of coupling areas


Project status: revision confirmed.
1st publication of the International Standard ISO/IEC 10536-2 in December 1995
.

ISO/IEC 10536-3 Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards -
Part 3: Electronic signals and reset procedures


International Standard, published in December 1996


Workplan

The reached and expected dates are:

  WD CD FCD FDIS IS
10536-2
(Revision)
        2003-04
10536-3
(Revision)
        2003-04
Abbreviations:

WD:
Working Draft
CD:
Committee Draft
FCD:
Final Committee Draft
FDIS:
Final Draft International Standard
IS:
International Standard

 

Project Editors

The Standard ISO/IEC 10536-1 is edited by:

10536-1: Toshi KATO, Japan





Project Details on:

ISO/IEC 14443, Proximity cards

The Standard series ISO/IEC 14443 consists of 4 parts, which are:

ISO/IEC 14443-1 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 1: Physical characteristics


International Standard, published on 15th April 2000.

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 14443-2 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 2: Radio frequency power and signal interface


International Standard, published on 1st July 2001.

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 14443-2/AMD2 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 2: Radio frequency power and signal interface -

Amendment 2: Bit rates of fc/64, fc/32 and fc/16

Committee Draft: Ballot is from 2003-07-29 until 2003-10-29

ISO/IEC 14443-2/AMD3 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 2: Radio frequency power and signal interface -

Amendment 3: Bit rates of fc/8 and higher

Working Draft, expected in November 2003.

ISO/IEC 14443-3 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 3: Initialization and anticollision


International Standard, published on 1st February 2001.

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 14443-3/AMD1 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 3: Initialization and anticollision -

Amendment 1: Bit rates of fc/64, fc/32 and fc/16

Committee Draft: Ballot is from 2003-07-29 until 2003-10-29

ISO/IEC 14443-3/AMD2 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 3: Initialization and anticollision -

Amendment 2: Bit rates of fc/8 and higher

Working Draft, expected in November 2003.

ISO/IEC 14443-3/AMD3 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 3: Initialization and anticollision -

Amendment 3: Clarification of RFU value handling

Working Draft, expected in August 2003.

ISO/IEC 14443-4 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 4: Transmission protocol


International Standard, published on 1st February 2001.

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 14443-4/AMD1 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 4: Transmission protocol -

Amendment 1: Clarification of RFU value handling

Working Draft, expected in August 2003.

ISO/IEC 14443-4/AMD2 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 4: Transmission protocol -

Amendment 2: Bit rates of fc/8 and higher

Working Draft, expected in November 2003.

ISO/IEC 14443-4/AMD3 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 4: Transmission protocol -

Amendment 3: Bit rates of fc/64, fc/32 and fc/16

Working Draft, expected in November 2003.


 

Workplan

The reached and expected dates are:

  WD CD FCD FDIS IS
14443-1         2000-04
14443-2         2001-07
14443-2/AMD2 2003-06 2003-07 2003-11 2004-04 2004-07
14443-2/AMD3 2003-11        
14443-3         2001-02
14443-3/AMD1 2003-06 2003-07 2003-11 2004-04 2004-07
14443-3/AMD2 2003-11        
14443-3/AMD3 2003-08 2003-11 2004-04 2004-11 2005-01
14443-4         2001-02
14443-4/AMD1 2003-08 2003-11 2004-04 2004-11 2005-01
14443-4/AMD2 2003-11        
14443-4/AMD3 2003-11           
Abbreviations:

WD: Working Draft
CD: Committee Draft
FCD: Final Committee Draft
FDIS: Final Draft International Standard
IS: International Standard



Project Editors

The parts of ISO/IEC 14443 and their amendments are edited by:

14443-1: Toshi KATO, Japan

14443-2: Michael HEGENBARTH, Germany (interim)

14443-2/AMD2: Reinhard MEINDL, Austria

14443-2/AMD3: Kazushige TSURUMI, Japan

14443-3: Pascal ROUX, France (interim)

14443-3/AMD1: Reinhard MEINDL, Austria

14443-3/AMD2: Kazushige TSURUMI, Japan

14443-3/AMD3: N.N.

14443-4: Hauke MEYN, Germany

14443-4/AMD1: N.N.

14443-4/AMD2: Kazushige TSURUMI, Japan

14443-4/AMD3: Reinhard MEINDL, Austria





Project Details on:

ISO/IEC 15693, Vicinity cards

For the vicinity cards the work programme of WG8 comprises the standard series ISO/IEC 15693 and their amendments, as follows:

ISO/IEC 15693-1 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards -
Part 1: Physical characteristics


International Standard, published on 15th July 2000.

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 15693-2 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards -
Part 2: Air interface and initialisation


International Standard, published on 1st May 2000.

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 15693-3 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards -
Part 3: Anticollision and transmission protocol


International Standard, published on 1st April 2001.

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 15693-3/AMD1 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards -
Part 3: Anticollision and transmission protocol -
Amendment 1: Assignments of the AFI codings '9x' to 'Cx'


Working Draft, expected for April 2003


Workplan

The reached and expected dates are:

  WD CD FCD FDIS IS
15693-1         2000-07
15693-2         2000-05
15693-3         2001-04
15693-3/AMD1 2003-08 2003-11 2004-04 2004-10 2005-01
Abbreviations:

WD: Working Draft
CD: Committee Draft
FCD: Final Committee Draft
FDIS: Final Draft International Standard
IS: International Standard


Project Editors

The parts of ISO/IEC 15693 and their amdendments are edited by:

15693-1: Toshi KATO, Japan

15693-2: Chris STANFORD, U.K. (interim)

15693-3: Alain BERTHON, France

15693-3/AMD1: Alain BERTHON, France





Project Details on:

ISO/IEC 10373-6, 10373-7,
Test methods for the contactless integrated circuit(s) cards


The Standard series ISO/IEC 10373 gathers all the test methods applicable for cards of different technologies. The Parts 6 and 7 of ISO/IEC 10373 and the related amendments cover the test methods on the two types of contactless chipcards, i.e. proximity cards and vicinity cards.

ISO/IEC 10373-6 Identification cards - Test methods - Part 6: Proximity cards

International Standard, published on 15th May 2001

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 10373-6/AMD1 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 1: Additional PICC test methods

3rd Committee Draft (3rd P-DAM), expected to be balloted by July 2003

ISO/IEC 10373-6/AMD2 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 2: Improved RF test methods

Final Draft International Standard: Ballot is from 2003-07-03 until 2003-09-03

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the FDIS version or the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 10373-6/AMD3 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 3: Additional PCD test methods

Committee Draft (P-DAM), expected to be balloted by July 2003

ISO/IEC 10373-6/AMD4 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 4: Additional test methods for PCD RF interface and PICC alternating field exposure

Working Draft, expected in November 2003.

ISO/IEC 10373-6/AMD5 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 5: Bit rates of fc/64, fc/32 and fc/16

Working Draft, expected in November 2003.

ISO/IEC 10373-6/AMD6 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 6: Bit rates of fc/8 and higher

Working Draft, expected in November 2003.

ISO/IEC 10373-7 Identification cards - Test methods - Part 7: Vicinity cards

International Standard, published on 15th May 2001

NOTE:
The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 10373-7/AMD1 Identification cards - Test methods - Part 7: Vicinity cards -
Amendment 1: Additional test methods


Working Draft, expected for November 2003


Workplan

The reached and expected dates are:

  WD CD FCD FDIS IS
10373-6         2001-05
10373-6/AMD1 2002-02 2002-07
2002-10 (2ndCD)
2003-07 (3rd CD)
2003-11 2004-04 2004-07
10373-6/AMD2 2002-02 2002-07 2002-10 2003-03 2003-09
10373-6/AMD3 2002-02 2003-07 2003-11 2004-04 2004-07
10373-6/AMD4 2003-11 2003-04 2004-10 2005-03 2005-05
10373-6/AMD5 2003-07 2003-11 2004-04 2004-10 2005-01
10373-6/AMD6 2003-11        
10373-7         2001-05
10373-7/AMD1 2003-11       2004-11
Abbreviations:

WD: Working Draft
CD: Committee Draft
FCD: Final Committee Draft
FDIS: Final Draft International Standard
IS: International Standard

Project Editors

The parts 6 and 7 of 10373 and their amendments are edited by:

10373-6: Klaus SICKERT, Germany

10373-6/AMD1: Mickey COHEN, Israel

10373-6/AMD2: Pascal ROUX, France

10373-6/AMD3: Mickey COHEN, Israel

10373-6/AMD4: Pascal ROUX, France

10373-6/AMD5: Reinhard MEINDL, Austria

10373-6/AMD6: Kazushige TSURUMI, Japan

10373-7: Klaus SICKERT, Germany

10373-7/AMD1: N.N.

Top of page

© 2003