Standing Document 1 (SD1): WG8 Projects

N04-122

ISO/IEC JTC1/SC17/WG8
Contactless integrated circuit(s) cards
ISO/IEC JTC1/SC17/WG8 SD1

Standing Document 1: WG8 Projects

(Status as of 2004-03-18)

The projects of WG8 are concentrated on the development and maintenance of the following standards:

ISO/IEC 14443, Proximity cards (PICCs) (Project Details)
ISO/IEC 10373-6, Test methods for proximity cards (Project Details)
ISO/IEC 15693, Vicinity cards (VICCs) (Project Details)
ISO/IEC 10373-7, Test methods for vicinity cards (Project Details)
ISO/IEC 10536, Close-coupled cards (CICCs) (Project Details)

For details on WG8 projects and other WG8 related details from the SC17 Secretariat click here

Project Details on:

ISO/IEC 14443, Proximity cards

The Standard series ISO/IEC 14443 consists of 4 parts, which are:

ISO/IEC 14443-1 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 1: Physical characteristics

International Standard, published on 15th April 2000.

This part of 14443 is currently under revision and will reach CD status probably by begin of 2005

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 14443-2 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 2: Radio frequency power and signal interface

International Standard, published on 1st July 2001.

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 14443-2/AM2 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 2: Radio frequency power and signal interface -
Amendment 2: Bit rates of fc/64, fc/32 and fc/16

Final Committee Draft (FPDAM): Ballot is from 2004-03-17 until 2004-07-17.

ISO/IEC 14443-2/AM3 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 2: Radio frequency power and signal interface -
Amendment 3: Bit rates of fc/8 and higher

Working Draft will be expected in 2005.

ISO/IEC 14443-3 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 3: Initialization and anticollision

International Standard, published on 1st February 2001.

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 14443-3/AM1 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 3: Initialization and anticollision -
Amendment 1: Bit rates of fc/64, fc/32 and fc/16

Final Committee Draft (FPDAM): Ballot is from 2004-03-17 until 2004-07-17

ISO/IEC 14443-3/AM2 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 3: Initialization and anticollision -
Amendment 2: Bit rates of fc/8 and higher

Working Draft will be expected in 2005

ISO/IEC 14443-3/AM3 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 3: Initialization and anticollision -
Amendment 3: Clarification of RFU value handling

Committee Draft (PDAM): Ballot is expected to be started in February 2004.

ISO/IEC 14443-4 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 4: Transmission protocol

International Standard, published on 1st February 2001.

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 14443-4/AM1 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 4: Transmission protocol -
Amendment 1: Clarification of RFU value handling

Committee Draft (PDAM): Ballot is expected to be started in February 2004.

ISO/IEC 14443-4/AM2 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 4: Transmission protocol -
Amendment 2: Bit rates of fc/8 and higher

Working Draft will be expected in 2005.

ISO/IEC 14443-4/AM3 Identification cards - Contactless integrated circuit(s) cards - Proximity cards -
Part 4: Transmission protocol -
Amendment 3: Bit rates of fc/64, fc/32 and fc/16

Working Draft may be available in Feburary 2004.

Workplan

The reached and expected dates are:

WD CD FCD FDIS IS

14443-1 2000-04

14443-1 Revision 2004-10

14443-2 2001-07

14443-2/AM2 2003-06 2003-07 2003-02 2004-10 2005-01

14443-2/AM3 2005

14443-3 2001-02

14443-3/AM1 2003-06 2003-07 2003-12 2004-10 2005-01

14443-3/AM2 2005

14443-3/AM3 2003-09 2004-02 2004-07 2004-12 2005-03

14443-4 2001-02

14443-4/AM1 2003-09 2004-02 2004-07 2004-12 2005-03

14443-4/AM2 2005

14443-4/AM3 (to be
confirmed)
Abbreviations:

WD: Working Draft

CD: Committee Draft

FCD: Final Committee Draft

FDIS: Final Draft International Standard

IS: International Standard

AMx: Amendment x

Project Editors

The parts of ISO/IEC 14443 and their amendments are edited by:

14443-1: Pascal ROUX, France

14443-2: Michael HEGENBARTH, Germany (interim)

14443-2/AM2: Reinhard MEINDL, Austria

14443-2/AM3: Kazushige TSURUMI, Japan

14443-3: Pascal ROUX, France (interim)

14443-3/AM1: Reinhard MEINDL, Austria

14443-3/AM2: Kazushige TSURUMI, Japan

14443-3/AM3: Mickey COHEN, Israel

14443-4: Hauke MEYN, Germany

14443-4/AM1: Mickey COHEN, Israel

14443-4/AM2: Kazushige TSURUMI, Japan

14443-4/AM3: Reinhard MEINDL, Austria

Top of page

Project Details on:

ISO/IEC 10373-6, Test methods proximity cards

The Standard series ISO/IEC 10373 gathers all the test methods applicable for cards of different technologies. The part 6 of ISO/IEC 10373 and the related amendments cover the test methods on the proximity cards.

ISO/IEC 10373-6 Identification cards - Test methods - Part 6: Proximity cards

International Standard, published on 15th May 2001

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 10373-6/AM1 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 1: Protocol test methods for proximity cards

2nd Committee Draft (PDAM): Ballot is expected for the period from February 2004 until May 2004.

ISO/IEC 10373-6/AM2 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 2: Improved RF test methods

International Standard, published on 16th October 2003

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the FDIS version or the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 10373-6/AM3 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 3: Protocol test methods for proximity coupling devices

2nd Committee Draft (PDAM): Ballot is expected for the period from February 2004 until May 2004.

ISO/IEC 10373-6/AM4 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 4: Additional test methods for PCD RF interface and PICC alternating field exposure

Working Draft, expected in February 2004.

ISO/IEC 10373-6/AM5 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 5: Bit rates of fc/64, fc/32 and fc/16

Working Draft, expected in February 2004.

ISO/IEC 10373-6/AM6 Identification cards - Test methods - Part 6: Proximity cards -
Amendment 6: Bit rates of fc/8 and higher

Working Draft, expected in 2005

Workplan

The reached and expected dates are:

WD CD FCD FDIS IS

10373-6 2001-05

10373-6/AM1 2002-02 2002-07
2002-10 (2ndCD)
2004-02 (3rdCD) 2003-07
2004-07 (2ndFCD) 2004-12 2005-03

10373-6/AM2 2003-10

10373-6/AM3 2002-02 2003-07
2004-02 (2ndCD) 2004-07 2004-12 2005-03

10373-6/AM4 2004-02 2004-10 2005-02 2005-07 2005-10

10373-6/AM5 2004-02 2004-05 2004-10 2005-03 2005-06

10373-6/AM6 2005
Abbreviations:

WD: Working Draft

CD: Committee Draft

FCD: Final Committee Draft

FDIS: Final Draft International Standard

IS: International Standard

AMx: Amendment x

Project Editors

The part 6 of 10373 and their amendments are edited by:

10373-6: Klaus SICKERT, Germany

10373-6/AM1: Mickey COHEN, Israel

10373-6/AM2: Pascal ROUX, France

10373-6/AM3: Mickey COHEN, Israel

10373-6/AM4: Pascal ROUX, France

10373-6/AM5: N.N.

10373-6/AM6: Kazushige TSURUMI, Japan

Top of page

Project Details on:

ISO/IEC 15693, Vicinity cards

For the vicinity cards the work programme of WG8 comprises the standard series ISO/IEC 15693 and their amendments, as follows:

ISO/IEC 15693-1 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards -
Part 1: Physical characteristics

International Standard, published on 15th July 2000.

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 15693-2 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards -
Part 2: Air interface and initialisation

International Standard, published on 1st May 2000.

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 15693-3 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards -
Part 3: Anticollision and transmission protocol

International Standard, published on 1st April 2001.

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 15693-3/AM1 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards -
Part 3: Anticollision and transmission protocol -
Amendment 1: Assignments of the AFI codings '9x' to 'Cx'

Working Draft, expected for April 2003

Workplan

The reached and expected dates are:

WD CD FCD FDIS IS

15693-1 2000-07

15693-2 2000-05

15693-3 2001-04

15693-3/AM1 2003-08 2003-11 2004-04 2004-10 2005-01
Abbreviations:

WD: Working Draft

CD: Committee Draft

FCD: Final Committee Draft

FDIS: Final Draft International Standard

IS: International Standard

AMx: Amendment x

Project Editors

The parts of ISO/IEC 15693 and their amdendments are edited by:

15693-1: Toshi KATO, Japan

15693-2: Chris STANFORD, U.K. (interim)

15693-3: Alain BERTHON, France

15693-3/AM1: Alain BERTHON, France

Top of page

Project Details on:

ISO/IEC 10373-7, Test methods for vicinity cards

The Standard series ISO/IEC 10373 gathers all the test methods applicable for cards of different technologies. The part 7 of ISO/IEC 10373 and the related amendments cover the test methods on the vicinity cards.

ISO/IEC 10373-7 Identification cards - Test methods - Part 7: Vicinity cards

International Standard, published on 15th May 2001

NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.

ISO/IEC 10373-7/AM1 Identification cards - Test methods - Part 7: Vicinity cards -
Amendment 1: Additional test methods

Working Draft, expected in June 2004.

Workplan

The reached and expected dates are:

WD CD FCD FDIS IS

10373-7 2001-05

10373-7/AM1 2004-06
Abbreviations:

WD: Working Draft

CD: Committee Draft

FCD: Final Committee Draft

FDIS: Final Draft International Standard

IS: International Standard

AMx: Amendment x

Project Editors

The part 7 of 10373 and their amendments are edited by:

10373-7: Klaus SICKERT, Germany

10373-7/AM1: N.N.

Top of page

Project Details on:

ISO/IEC 10536, Close-coupled cards

The Standard series ISO/IEC 10536 consists of 3 parts, which are:

ISO/IEC 10536-1 Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards -
Part 1: Physical characteristics

International Standard with stabilized status
2nd publication of this Standard was on 15th April 2000

ISO/IEC 10536-2 Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards -
Part 2: Dimensions and location of coupling areas

International Standard with stabilized status
1st publication of this Standard was in December 1995.

ISO/IEC 10536-3 Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards -
Part 3: Electronic signals and reset procedures

International Standard with stabilized status
1st publication of this Standard was in December 1996

Top of page

ISO/IEC 14443-1	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 1: Physical characteristics International Standard, published on 15th April 2000. This part of 14443 is currently under revision and will reach CD status probably by begin of 2005 NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 14443-2	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 2: Radio frequency power and signal interface International Standard, published on 1st July 2001. NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 14443-2/AM2	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 2: Radio frequency power and signal interface - Amendment 2: Bit rates of fc/64, fc/32 and fc/16 *Final Committee Draft (FPDAM):* Ballot is from 2004-03-17 until 2004-07-17.
ISO/IEC 14443-2/AM3	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 2: Radio frequency power and signal interface - Amendment 3: Bit rates of fc/8 and higher Working Draft will be expected in 2005.
ISO/IEC 14443-3	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision International Standard, published on 1st February 2001. NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 14443-3/AM1	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision - Amendment 1: Bit rates of fc/64, fc/32 and fc/16 *Final Committee Draft (FPDAM):* Ballot is from 2004-03-17 until 2004-07-17
ISO/IEC 14443-3/AM2	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision - Amendment 2: Bit rates of fc/8 and higher Working Draft will be expected in 2005
ISO/IEC 14443-3/AM3	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision - Amendment 3: Clarification of RFU value handling Committee Draft (PDAM): Ballot is expected to be started in February 2004.
ISO/IEC 14443-4	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 4: Transmission protocol International Standard, published on 1st February 2001. NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 14443-4/AM1	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 4: Transmission protocol - Amendment 1: Clarification of RFU value handling Committee Draft (PDAM): Ballot is expected to be started in February 2004.
ISO/IEC 14443-4/AM2	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 4: Transmission protocol - Amendment 2: Bit rates of fc/8 and higher Working Draft will be expected in 2005.
ISO/IEC 14443-4/AM3	Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 4: Transmission protocol - Amendment 3: Bit rates of fc/64, fc/32 and fc/16 Working Draft may be available in Feburary 2004.

ISO/IEC 10373-6	Identification cards - Test methods - Part 6: Proximity cards International Standard, published on 15th May 2001 NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 10373-6/AM1	Identification cards - Test methods - Part 6: Proximity cards - Amendment 1: Protocol test methods for proximity cards 2nd Committee Draft (PDAM): Ballot is expected for the period from February 2004 until May 2004.
ISO/IEC 10373-6/AM2	Identification cards - Test methods - Part 6: Proximity cards - Amendment 2: Improved RF test methods International Standard, published on 16th October 2003 NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the FDIS version or the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 10373-6/AM3	Identification cards - Test methods - Part 6: Proximity cards - Amendment 3: Protocol test methods for proximity coupling devices 2nd Committee Draft (PDAM): Ballot is expected for the period from February 2004 until May 2004.
ISO/IEC 10373-6/AM4	Identification cards - Test methods - Part 6: Proximity cards - Amendment 4: Additional test methods for PCD RF interface and PICC alternating field exposure Working Draft, expected in February 2004.
ISO/IEC 10373-6/AM5	Identification cards - Test methods - Part 6: Proximity cards - Amendment 5: Bit rates of fc/64, fc/32 and fc/16 Working Draft, expected in February 2004.
ISO/IEC 10373-6/AM6	Identification cards - Test methods - Part 6: Proximity cards - Amendment 6: Bit rates of fc/8 and higher Working Draft, expected in 2005

ISO/IEC 15693-1	Identification cards - Contactless integrated circuit(s) cards - Vicinity cards - Part 1: Physical characteristics International Standard, published on 15th July 2000. NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 15693-2	Identification cards - Contactless integrated circuit(s) cards - Vicinity cards - Part 2: Air interface and initialisation International Standard, published on 1st May 2000. NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 15693-3	Identification cards - Contactless integrated circuit(s) cards - Vicinity cards - Part 3: Anticollision and transmission protocol International Standard, published on 1st April 2001. NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 15693-3/AM1	Identification cards - Contactless integrated circuit(s) cards - Vicinity cards - Part 3: Anticollision and transmission protocol - Amendment 1: Assignments of the AFI codings '9x' to 'Cx' Working Draft, expected for April 2003

ISO/IEC 10373-7	Identification cards - Test methods - Part 7: Vicinity cards International Standard, published on 15th May 2001 NOTE: The version of this Standard, downloadable by clicking the Standard number, can only be made available in its FCD status. For obtaining the published Standard (IS) you have to contact your national standardization organization.
ISO/IEC 10373-7/AM1	Identification cards - Test methods - Part 7: Vicinity cards - Amendment 1: Additional test methods Working Draft, expected in June 2004.

ISO/IEC 10536-1	Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards - Part 1: Physical characteristics International Standard with stabilized status 2nd publication of this Standard was on 15th April 2000
ISO/IEC 10536-2	Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards - Part 2: Dimensions and location of coupling areas International Standard with stabilized status 1st publication of this Standard was in December 1995.
ISO/IEC 10536-3	Identification cards - Contactless integrated circuit(s) cards - Close-coupled cards - Part 3: Electronic signals and reset procedures International Standard with stabilized status 1st publication of this Standard was in December 1996